How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add another key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then a new key and transponder have to be purchased and programmed to the car.
Change your keys regularly to prevent one from wearing out faster than the other. This will also ensure that your keys remain in pristine condition.
Replacement Case
In contrast to the traditional Saab keys of old keys, the latest key fobs contain electronics which makes it difficult to make a copy. This has made stealing car keys much more difficult than twenty years ago. However, it has made replacing lost keys a more costly endeavor.
Every owner of a Saab 9-3 must have at minimum two working keys. If one of them is lost, it costs a fortune to add another to the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.
There are some ways around these costly. Some parts dealers will search for the code from an old key (usually the same one that opens the doors and turns on the ignition) and cut a brand new key blade from metal for a fraction of the dealer's cost. The key must be the exact same as the original for it to function in your vehicle.
You can also replace the case yourself by following these steps. You'll need an open-faced screwdriver and a lot of patience. With the screwdriver, you can pry off the plastic and then remove the emergency key. Once you have the case open, remove the electronic components and place them inside the new case. Make sure you insert the correct badge and key back into the case as well.
Replacement Battery
The Saab 9-3 replacement battery is a budget part that can be easily and quickly replaced. The YouTube video of Cyclone Cyd demonstrates the procedure for replacing the remote fob battery in just four simple steps. This tutorial will work with any modern Saab key fob. However, the process may differ slightly.
The first step is to locate the button that will release the backup key in the fob. The button is usually found on the back of your fob close to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the tiny hole on this button. This should be enough to open the fob case so that you can change the battery.
Once the new CR1632 battery is in place You can then reassemble the remote key fob, and then program it to your car. The whole process should not take more than one hour. This is a simple procedure that doesn't require special tools.
If you lose your key, the process is slightly more complicated, but it can still be accomplished. The dealer must first read the VIN of the vehicle, and then purchase a replacement TWICE module and key blade with the correct unique code. The dealer will then need to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob contains a battery that is used to lock and unlock your car. The batteries are able to last for, and they will eventually go out of service. This is a problem that occurs with all cars. The good news is that you can change the batteries in most key fobs without having to replace the entire case. Amazon sells replacement fobs that have all the electronics in place. You can simply remove the case and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot that is in the middle. The screwdriver should be moved around the case until it will split open, making it easy to remove.
If you are about to replace the keys, make sure you have a spare as this will reduce the total cost by a significant amount. If you have an extra key, you can ask the dealer to cut the key and program it for your vehicle. This is less expensive than purchasing a new key fob.
If you do not have a spare key car key, you can add a second key to your car, however this requires a lot of research and effort. The cost for adding a second key is several hundred dollars and it also requires programming of the car's computer. Professionals can do this however, it's a costly option.
saab replacement key -3 uses an advanced alarm system that is based on a key code. This means that if you lose your only functioning key, getting another key can be extremely expensive since the car has to have a computer module installed and it also needs to be specifically designed to accept a different key. Most locksmiths cannot do this, and even a dealer will charge several hundred dollars to program the new key!
Dealers will charge you a premium to replace your car computer (also called the CIM or SAAB twice) if you lose your only functioning key. Instead, we can reprogram the EEPROM of your current car computer to prepare it for a new key, and save you over 50% of what you'd spend at a dealer.
If you have owned a SAAB 9-3 for quite a while and you're aware of the ignition keys are not very durable. They can get extremely sticky, and the buttons are known to be ripped off every now and then It is recommended that you consider purchasing a new one if yours isn't functioning properly. Luckily, replacing the ignition key isn't as difficult as it sounds and can be done in a short time with the appropriate tools.